584.837 aktive Mitglieder*
5.612 Besucher online*
Kostenfrei registrieren
Anmelden Registrieren

HEIDENHAIN

Forum

Webinar HEIDENHAIN Touch Probes and Touch Probe Cycles, Application of HEIDENHAIN Touch Probes and Touch Probe Cycles

Beitrag 21.03.2016, 09:17 Uhr
wiendl_heidenhain
wiendl_heidenhai...
Level 2 = Community-Facharbeiter
**
Gruppe: Mitglied
Mitglied seit: 15.07.2013
Beiträge: 52

Hello everyone,

This webinar provides an introduction to the manual and automatic touch probe cycles of the iTNC 530 and TNC 640 controls. It describes the required settings and demonstrates the calibration of the touch probe. Examples illustrate how to use the touch probe for aligning, datum setting and measuring components. With the KinematicsOpt option, the webinar shows an easy way to increase the machine tool's tilting accuracy simply by using touch probe cycles. Methods: "Touch Probe Applications” presentation, live on-screen demonstration on the machine tool".

Recording:
https://de.industryarena.com/heidenhain/web...nung/1373899104

Presentation:
Angehängte Datei  TouchProbe.pdf ( 1.71MB ) Anzahl der Downloads: 50


If you have questions do not hesitate to contact me ([email protected])

Best regards
Michael Wiendl


--------------------
Michael Wiendl
NC-Trainer
HEIDENHAIN
TOP    



1 Besucher lesen dieses Thema (Gäste: 1)
0 Mitglieder: