[chatjokey]

Hello.



We have an sqt200 lathe with mazatrol fusion 640t control. During the spindle repairing, the battery was gone. We have managed to bring back the nc side, but as I found out there was no backups of tool data and tool offsets. folder t_backup\other is empty and no files like toldat01 on hdd. also no files on cards and disks.
So, the machine seem to be working, no errors. Except tooleye not working and emty tools tables. work offsets and jaws tables are empty also.
 Screenshot_2018_12_24_17_53_49.png ( 194.62KB ) Anzahl der Downloads: 15


Can someone share t_backup\other folder from simular working machine? can offer award for this.

[chatjokey]

Hello.



We have an sqt200 lathe with mazatrol fusion 640t control. During the spindle repairing, the battery was gone. We have managed to bring back the nc side, but as I found out there was no backups of tool data and tool offsets. folder t_backup\other is empty and no files like toldat01 on hdd. also no files on cards and disks.
So, the machine seem to be working, no errors. Except tooleye not working and emty tools tables. work offsets and jaws tables are empty also.
 Screenshot_2018_12_24_17_53_49.png ( 194.62KB ) Anzahl der Downloads: 15


Can someone share t_backup\other folder from simular working machine? can offer award for this.

problem solved. One guy from another forum have sent to us backup from sqt250. we upload it using data i/o, and it works.