HEIDENHAIN
Forum
11882
MILLPLUS V330 FEHLER E60
25.09.2015, 11:38 Uhr
jaxxmaxx
Level 1 = Community-Lehrling
Gruppe: Mitglied
Mitglied seit: 18.06.2014
Beiträge: 13
Mitglied seit: 18.06.2014
Beiträge: 13
Hello
Sorry but I'm french and I don't speak German. I need your help beacause I have a DMU 70V in Millplus V330 and nobody know the millplus in France.
I have the E60 error at startup of the machine and I don't know what it say.
If you have any informations for help me you are welcome.
Sorry but I'm french and I don't speak German. I need your help beacause I have a DMU 70V in Millplus V330 and nobody know the millplus in France.
I have the E60 error at startup of the machine and I don't know what it say.
If you have any informations for help me you are welcome.
29.09.2015, 07:46 Uhr
MSMS
Level 2 = Community-Facharbeiter
Gruppe: Mitglied
Mitglied seit: 02.12.2007
Beiträge: 119
Mitglied seit: 02.12.2007
Beiträge: 119
QUOTE (jaxxmaxx @ 25.09.2015, 11:38 Uhr) 
Hello
Sorry but I'm french and I don't speak German. I need your help beacause I have a DMU 70V in Millplus V330 and nobody know the millplus in France.
I have the E60 error at startup of the machine and I don't know what it say.
If you have any informations for help me you are welcome.
Sorry but I'm french and I don't speak German. I need your help beacause I have a DMU 70V in Millplus V330 and nobody know the millplus in France.
I have the E60 error at startup of the machine and I don't know what it say.
If you have any informations for help me you are welcome.
Hello
E60 = Axis not ready for operation
29.09.2015, 16:06 Uhr
Stephan EM
Level 5 = Community-Ingenieur
Gruppe: Mitglied
Mitglied seit: 13.05.2002
Beiträge: 729
Mitglied seit: 13.05.2002
Beiträge: 729
Hello,
the E60 con accrue from several reasons: Like door not closed (ore bad door switch) ore a bad SADP ore DDC2 Interface card.
Regards Stephan
the E60 con accrue from several reasons: Like door not closed (ore bad door switch) ore a bad SADP ore DDC2 Interface card.
Regards Stephan
--------------------
Service für Ihre Deckel FP und ihre Deckel Maho Maschinen.
Steuerungsreparaturen, elektrische Ersatzteile und mechanische Reparateuren
Steuerungsreparaturen, elektrische Ersatzteile und mechanische Reparateuren
16.11.2019, 12:29 Uhr
mailneo
Level 1 = Community-Lehrling
Gruppe: Mitglied
Mitglied seit: 10.08.2018
Beiträge: 2
Mitglied seit: 10.08.2018
Beiträge: 2
Hello,
I have a millplus v330 in DMU50V.
Has someone solved the error problem E60 (Ready signal axes low) and E123 (star / delta: undefined input state)? Usually appear together, one followed by the other. Although, when the machine has been running for a while and is hot, these errors do not appear.
Thanks
I have a millplus v330 in DMU50V.
Has someone solved the error problem E60 (Ready signal axes low) and E123 (star / delta: undefined input state)? Usually appear together, one followed by the other. Although, when the machine has been running for a while and is hot, these errors do not appear.
Thanks
17.11.2019, 16:45 Uhr
REEEN
Level 3 = Community-Techniker
Gruppe: Mitglied
Mitglied seit: 29.04.2011
Beiträge: 162
Mitglied seit: 29.04.2011
Beiträge: 162
Could be a Problem with your 24V Power Supply or a bad Input card or a bad Power Supply of your CNC.
QUOTE (mailneo @ 16.11.2019, 12:29 Uhr)
Hello,
I have a millplus v330 in DMU50V.
Has someone solved the error problem E60 (Ready signal axes low) and E123 (star / delta: undefined input state)? Usually appear together, one followed by the other. Although, when the machine has been running for a while and is hot, these errors do not appear.
Thanks
I have a millplus v330 in DMU50V.
Has someone solved the error problem E60 (Ready signal axes low) and E123 (star / delta: undefined input state)? Usually appear together, one followed by the other. Although, when the machine has been running for a while and is hot, these errors do not appear.
Thanks
1 Besucher lesen dieses Thema (Gäste: 1) 0 Mitglieder: |
