HEIDENHAIN
Forum
11855
DMU 80 P hi-dyn, MILL PLUS , problem with head postition
17.02.2022, 08:36 Uhr
urke12
Level 1 = Community-Lehrling
Gruppe: Mitglied
Mitglied seit: 16.02.2022
Beiträge: 1
Mitglied seit: 16.02.2022
Beiträge: 1
Hi guys, could someone help me??
I have problem with changing tools, position of head before start to changing is wrong, I thing that M19 position is not correct.
I need parametar to head position, does someone has that parametar?
Does someone has similar problem like me?
p.s. Everything starts when I want change X/Z-Y/Z system mesure, my repairman change and since than I cant change tool with changer.
Thank you in advanced to help me.
I have problem with changing tools, position of head before start to changing is wrong, I thing that M19 position is not correct.
I need parametar to head position, does someone has that parametar?
Does someone has similar problem like me?
p.s. Everything starts when I want change X/Z-Y/Z system mesure, my repairman change and since than I cant change tool with changer.
Thank you in advanced to help me.
17.02.2022, 09:21 Uhr
schwindl
Level 7 = Community-Professor
Gruppe: Mitglied
Mitglied seit: 18.09.2008
Beiträge: 2.312
Mitglied seit: 18.09.2008
Beiträge: 2.312
QUOTE (urke12 @ 17.02.2022, 08:36 Uhr) 
Hi guys, could someone help me??
I have problem with changing tools, position of head before start to changing is wrong, I thing that M19 position is not correct.
I need parametar to head position, does someone has that parametar?
Does someone has similar problem like me?
p.s. Everything starts when I want change X/Z-Y/Z system mesure, my repairman change and since than I cant change tool with changer.
Thank you in advanced to help me.
I have problem with changing tools, position of head before start to changing is wrong, I thing that M19 position is not correct.
I need parametar to head position, does someone has that parametar?
Does someone has similar problem like me?
p.s. Everything starts when I want change X/Z-Y/Z system mesure, my repairman change and since than I cant change tool with changer.
Thank you in advanced to help me.
Hello,
DMG MORI is responsible for the MILLPLUS-Support.
Please contact DMG MORI service.
--------------------
Gruß
Schwindl
Schwindl
18.02.2022, 20:05 Uhr
-michael-
Level 2 = Community-Facharbeiter
Gruppe: Mitglied
Mitglied seit: 21.07.2009
Beiträge: 118
Mitglied seit: 21.07.2009
Beiträge: 118
Parameter for M19 Position from Spindle is 2414.
Axis Position from X-Axis is between 3145-3160, Y-Axis 3245-3260
and Z-Axis is 3345-3360.
Check Value from Axis Diagnosis in Tool Change Position. Then
you can see which Parameter is correct.
Der Beitrag wurde von -michael- bearbeitet: 18.02.2022, 20:09 Uhr
Axis Position from X-Axis is between 3145-3160, Y-Axis 3245-3260
and Z-Axis is 3345-3360.
Check Value from Axis Diagnosis in Tool Change Position. Then
you can see which Parameter is correct.
Der Beitrag wurde von -michael- bearbeitet: 18.02.2022, 20:09 Uhr
1 Besucher lesen dieses Thema (Gäste: 1) 0 Mitglieder: |
