584.829 aktive Mitglieder*
4.842 Besucher online*
Kostenfrei registrieren
Anmelden Registrieren
HEIDENHAIN Forum

Millplus, data lost

Beitrag 01.06.2022, 18:37 Uhr
feodorko1
feodorko1
Level 1 = Community-Lehrling
*
Gruppe: Mitglied
Mitglied seit: 01.06.2022
Beiträge: 3

PLS
The machine has been switched off for 9 months.
we have these errors when turned on
there are also not axis present X/Y/Z/S
Some files I cant upload to the system

There are some pictures
PLS any ideas ?

Angehängte Datei  1.jpg ( 440.81KB ) Anzahl der Downloads: 28
TOP    
Beitrag 01.06.2022, 19:41 Uhr
-michael-
-michael-
Level 2 = Community-Facharbeiter
**
Gruppe: Mitglied
Mitglied seit: 21.07.2009
Beiträge: 118

Locks like machine parameters are lost.
I think the battery is empty.
TOP    
Beitrag 02.06.2022, 14:51 Uhr
feodorko1
feodorko1
Level 1 = Community-Lehrling
*
Gruppe: Mitglied
Mitglied seit: 01.06.2022
Beiträge: 3

I exchange a batery
Then I try to upload backups from disket

I get a error mesage during upload on cds lite ( Communications error during the transfer)
In logbook on millplus is error write protect O226
Are there some writeprotect parametrs?

Der Beitrag wurde von feodorko1 bearbeitet: 02.06.2022, 14:52 Uhr
TOP    
Beitrag 02.06.2022, 20:00 Uhr
-michael-
-michael-
Level 2 = Community-Facharbeiter
**
Gruppe: Mitglied
Mitglied seit: 21.07.2009
Beiträge: 118

To open the write protect goto machine parameters and type 1234+enter
After loading parameters press F1 (Manual). Control restart with changed parameters.
TOP    
Beitrag 07.06.2022, 16:26 Uhr
feodorko1
feodorko1
Level 1 = Community-Lehrling
*
Gruppe: Mitglied
Mitglied seit: 01.06.2022
Beiträge: 3

QUOTE (-michael- @ 02.06.2022, 21:00 Uhr) *
To open the write protect goto machine parameters and type 1234+enter
After loading parameters press F1 (Manual). Control restart with changed parameters.


I tried to do it but fortunately I have another error mesage
any idea pls....

Angehängte Datei  millplus.jpg ( 184.07KB ) Anzahl der Downloads: 24
TOP    



1 Besucher lesen dieses Thema (Gäste: 1)
0 Mitglieder: