506.105 aktive Mitglieder
4.018 Besucher online
Kostenfrei registrieren
Einloggen Registrieren
REIME NORIS - Banner
REIME NORIS News

OUR PRECISION IS YOUR SUCCESS

Economically chipless thread manufacturing in wrought aluminium and cast aluminium alloys

Economically chipless thread manufacturing in wrought aluminium and cast aluminium alloys

REIME NORIS expands its product portfolio for wrought aluminium and cast aluminium alloys with two newly developed cold forming taps.

Both tool types, like all taps of the "NEO" series, are made of HSSE-PM substrate. However, they differ in geometry and coating in order to achieve outstanding results in the respective field of application.

 

NORIS SPANLOS NEO AL

The NORIS SPANLOS NEO AL cold forming tap has been developed especially for the machining of wrought aluminium alloys. The geometry with an asymmetrical pressure point shape acts in the forming direction through a relatively steep stroke with very low torque. The stroke on the back is much flatter and thus has a supporting effect. This combination results in an enormous increase in tool life. A DLC (diamond like carbon) coating reliably protects against cold press welds, which occuring frequently in these materials.

 

NORIS SPANLOS NEO GAL

The NORIS SPANLOS NEO GAL cold forming tap has been developed especially for thread forming in difficulty deformable aluminium casting alloys. The geometry has a steeply pronounced symmetrical stroke both in the forming direction and at the back. The special feature is a sliding surface in between, which offers targeted resist to the particularly high abrasiveness of these cast materials. A multi-layer TICN coating, which has proven particularly effective in cases of abrasive wear, functions as a coating here.

In the standard product portfolio, the metric dimensions common for these materials, up to and including M10, are available, from M4 also with coolant hole. As in the entire range of NORIS SPANLOS tools, these two new types are also available from stock only with lubrication grooves.

REIME NORIS: Threading technology in highest precision with over 100 years of experience!

We are also presenting our new cold forming taps NORIS SPANLOS NEO AL and NORIS SPANLOS NEO GAL at EMO 2019. Convince yourself at the outstanding properties of these tools.

 

For further information please contact:

REIME NORIS GmbH,

Gewindetechnologie - Threading Technology

Gugelhammerweg 11, 90537 Feucht, Germany

Tel.: +49 9128/91160, Fax: +49 9128/911610

E-Mail: noris@noris-reime.de

 

 

About the company:

The REIME NORIS GmbH, Feucht b. Nuremberg, was founded in 1915 and today concentrates on the production, development, application technology and sales of precision threading tools such as taps, thread formers and thread mills. In addition to the name REIME, the NORIS brand is also well known in the professional world.
Today REIME is represented in more than 40 countries by subsidiaries and specialized dealers.

Verantwortlich für den Inhalt dieser Pressemitteilung: REIME NORIS GmbH Gewindetechnologie-Threading Technology

Kontakt

REIME NORIS GmbH Gewindetechnologie-Threading Technology
Gugelhammerweg 11
90537 Feucht
Deutschland
+49 9128 9116-0
+49 9128 9116-10

Routenplaner

Routenplaner