QUOTE (ndmisiek @ 31.12.2018, 11:23 Uhr)
hello.
the problem of machine constants has been solved.
there is now a problem after changing the language to English mc memory checksum error appears.
and I can not connect to the machine using the nclink rs 232 program, does anyone have a connection diagram and what data needs to be changed in machine constants?
Regards
Simon
Hello,
At the beginning I wanted all readers to wish all the best in the new year!
Small update:
I received machine constants from Maho, however I can not connect to the machine via the RS232 port. I use NClink software.
Can anyone help me how to set the machine and how should the configuration of the cable to connect look like?
I use a cable that communicates with the machine on the 432 control but all the time after downloading data from the machine receives a square
and you can not send out.
below the cable configuration.
Please help.
Regards
Simon
Der Beitrag wurde von ndmisiek bearbeitet: 03.01.2019, 08:27 Uhr
Angehängte Datei(en)
20190103_082503.jpg ( 156.27KB )
Anzahl der Downloads: 21