REISHAUER ULG 46

•  
  Referenznummer 1049-771911

  Baujahr 1986

  Betriebsstunden keine Angabe

• Anbieter

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Deutschland

  

• Hauptkategorie

  Metallbearbeitungsmaschinen

• Kategorie

  Gewinde-und Schneckenbearbeitungsmaschinen

• Typ

  Gewinde- u. Schneckenschleifmaschinen

• Fabrikat

  REISHAUER

• Technische Daten

  Werkstückdurchmesser

  460 mm

  Gewindelänge

  900 mm

  Gewindesteigung

  100 mm

  Gesamtleistungsbedarf

  10 kW

  Maschinengewicht ca.

  8 t

  Raumbedarf ca.

  m

• Beschreibung

  R E I S H A U E R (Switzerland)
  Universal -extra large- Thread-and Worm-Grinding Machine
  Model ULG 46 Year 1986
  ________________________________________________________________________________
  ___
  
  Grinding length 900 mm
  Max. workpiece clamping length 1.190/1.400 mm
  Workpiece Ø / thread Ø, min./max. 10 – 460 mm (!)
  Length adjustment of workhead on table 210 mm
  Max. weight of workpiece approx. 100 kg
  
  Workspindle bore approx. 65 mm
  
  Lead range for single-rib wheels 0.3 – 100 mm
  Max. profile 10 module
  Max. lead angle +/- 40 °
  
  Grinding wheel dimensions, Ø x width 350 x 20/40 mm
  Relief grinding size 0.03 – 8 mm
  Presettable number of flutes 2 – 10, 12, 14 and 16
  27 workpiece speeds 0.4 – 160 rpm
  Stepless adjustable grinding wheel speeds 72 – 2.500 rpm
  
  Spindle drive, approx. 10 kW * Total electric load approx.. 25 kW - 400
  V - 50 Hz
  Weight approx. 8.000 kg
  
  Accessories / Special Features:
  
  • Machine was built originally with an increased height of center for a max.
  Workpiece swing of
  460 mm, this allows thread work on larger workpieces and housings (aircraft
  industries)!
  • Internal Thread grinding device with two dressing devices ( long and
  short spindles),
  • various flanges with grinding wheels
  • USL 3200 Dressing device for pressure roll profiling, mounted above
  grinding wheel.
  (not motorized)
  • USL 700 Dressing device for manual profiling of single ribbed grinding
  wheels flanks.
  • Automatic plunge-cut device. Automatic lift-off of grinding slide for
  return of workpiece slide.
  • Relief grinding device with some cams, also suitable for plunge-in cuts.
  • Hydraulic tailstock with foot switch and expansion compensation.
  • Two simple dressing devices, manual operated for straight profiling
  • Two pieces 3-Point steadies for heavy workpiece supporting
  • Various flanges, set of change gears, many coolant nozzles, adjusting
  gauge, 3 Faceplates
  Up to dia 500 mm, separate switch cabinet to adjust various grinding cycles
  • Lift-off safety hood over the working area, monitored by electric
  switches, etc.
  There is no Coolant Device available, but connection to a central Coolant
  supply with valve control
  And with a separate Coolant chiller and a separate standing Dust extraction
  unit.
  
  
  
  Dieses Inserat wurde erstellt mit MODUL MWS - die Maschinenverwaltung von LogoTech.

• Zustand

  Gebraucht