504.301 aktive Mitglieder
4.645 Besucher online
Kostenfrei registrieren
Einloggen Registrieren
ETA Technology Pvt. Ltd - Banner

ETA Technology Pvt. Ltd

Produkte
Ball Turning & Burnishing Machine
 Ball Turning & Burnishing Machine
Endenbearbeitungsmaschine
ETA Technology Pvt. Ltd
Endenbearbeitungsmaschinen
Ball Turning and Burnishing Machine (BTBM) is used for turning and burnishing of ball head used in automobile ball joints (steering gears, for e.g). There is an optional CNC slide ( Z-axis) to machine the undercut relief behind the ball head. Sphericity achieved on the ball head is within 4μ and surface finish better than 0.1 μRa which is among the most accurate ones in the industry. Machine can be tooled up for Inner Ball Joint (IBJ), Inner Ball Joint (OBJ) and Suspension Ball Joint (SBJ) Ball pins.

Machines for Ball Valve Industry are also available.
  •  Ball Turning & Burnishing Machine
Tappet End Grinding Machine for Engine Valves
Tappet End Grinding Machine for Engine Valves
Ventil-Schleifmaschine
ETA Technology Pvt. Ltd
Ventil-Schleifmaschinen
Automatic loading and ejection of components. Job head is actuated through Pneumatic-hydraulic cylinder, Capable of removing material up to 2mm per stroke.

Application: To grind tappet end of Engine Valves to maintain valve length within specified tolerances.
  • Tappet End Grinding Machine for Engine Valves
Grooving, Chamfering & Tappet End Facing Machine
Grooving, Chamfering & Tappet End Facing Machine
Abrundmaschine
ETA Technology Pvt. Ltd
Abrundmaschinen
Automatic Loading and Unloading. Cycle time achieved is less than 10 secs. Two axis CNC slide for Grooving and Chamfering. Tappet face also machined in same setting.

Application: To do grooving, chamfering and facing at tappet end of the engine valve by turning process. Screen reader support enabled.
  • Grooving, Chamfering & Tappet End Facing Machine
Valves Straightening Machines
Valves Straightening Machines
Richtmaschine
ETA Technology Pvt. Ltd
Richtmaschinen
Valves Straightening Machines
Automatic Loading and Unloading System. Low Cycle time of 5 seconds. Stem Straightened within 0.05mm and head within 0.08 mm. Heating System for Titanium Valves or Valves with hardness over 40HRC.
Application: To straighten forged and heat treated Engine Valves
  • Valves Straightening Machines
High Speed Production Cell for Engine Valve Forgings
High Speed Production Cell for Engine Valve Forgings
Mehrstufen-Schmiedeautomat
ETA Technology Pvt. Ltd
Mehrstufen-Schmiedeautomaten
High Speed Production Cell for Engine Valve Forgings
The cell is designed for continuous production of engine valve head forgings. This consists of a Servo controlled Screw Press and two double head Upsetters and a Robot. The Upsetters are placed on either sides of the press, while the Robot is placed in between the Upsetters and in front of the Press. Individual Automatic component loading mechanism are provided on the Upsetters The bar components loaded manually into the bins of the Upsetters are picked and placed into the clamping vices of Upsetters. On Upsetting operation, the job is picked by the Robot and it places into the bottom die in the Press. The ram of the Press gets actuated to do forging operation, after which the unloader mechanism in the press take away the forged piece and puts in to a collection bin. All the machines are so precisely synchronized and programmed for continuous production run for making valve head forgings. The machine has a PLC based control system.
Application: For Producing valve forgings or similar components
  • High Speed Production Cell for Engine Valve Forgings
15T Friction Welding Machine
15T Friction Welding Machine
Sonstige Schweißmaschine und -apparat
ETA Technology Pvt. Ltd
Sonstige Schweißmaschinen und -apparate
15T Friction Welding Machine
15Ton Twin Sliding Head Machine with automatic loading (non-rotating part) and unloading the welded job

This 15 ton dual sliding head machine is designed for welding end pieces on tubes/pipes to make propeller shafts. End pieces are welded simultaneously with precise orientation, which reduces welding time drastically. The machine consists of a steel fabricated frame on which the LH and RH spindle heads moves on LM guides, by servo hydraulic cylinders. The piston rod of servo hydraulic cylinder which is rigidly mounted on the frame at the left is connected to the left spindle head slide. Another servo hydraulic cylinder at the right is mounted on a slide unit, which can be moved by a pneumatic cylinder. This arrangement helps in accommodating component length variants. The self-centering vices, one fixed and another adjustable are mounted in between LH and RH spindle heads.The machine is equipped with mechanisms for auto loading of non-rotating component (tubes) and unloading of welded components. The machine has a PLC based control system with an industrial PC and software capturing real time weld data.
Application: Enables welding at both ends of propeller shafts simultaneously to join end pieces to tube with precise orientation.
  • 15T Friction Welding Machine
Friction Stir Welding Machines
Friction Stir Welding Machines
Sonstige Schweimaschine und -apparat
ETA Technology Pvt. Ltd
Sonstige Schweißmaschinen und -apparate
Friction stir welding is an Eco-friendly process to weld and produce near nano grain size materials. It is a relatively new solid-state joining process and is useful for joining high strength aerospace aluminum alloys and other metallic alloys that are hard to weld using conventional fusion welding.

Application: It is useful for joining high strength aerospace aluminum alloys and other metallic alloys that are hard to weld using conventional fusion welding.
  • Friction Stir Welding Machines
3-Axis Durability Test Rig
3-Axis Durability Test Rig
Dauerschwingprüfmaschine
ETA Technology Pvt. Ltd
Dauerschwingprüfmaschinen
3-Axis Durability Test Rig
This facilitates easy configuration of the test set ups to conduct the following tests on Steering Gear of Passenger Cars and Utility Vehicles.

Durability tests
Alternated fatigue test
Reverse durability test
Wear tests
Wear test without power assistance
Parking test
Load cycle test
Rotation and reverse rotation endurance test

Mounting foot fatigue test
Input torque test
Rack pull test
Valve curve & leakage tests
Endurance test
Impact wear test
Efficiency test
Noise test (NVH)

Hydraulic linear actuators will simulate the stub axle condition.
Vertical pinion drive actuator will simulate the steering wheel
condition.

Application: This facilitates easy configuration of the test set ups to conduct the tests on Steering Gear of Passenger Cars and Utility Vehicles
  • 3-Axis Durability Test Rig