HEIDENHAIN
Forum
11901
help me write the program)
22.12.2023, 14:19 Uhr
MontanaT
Level 1 = Community-Lehrling
Gruppe: Mitglied
Mitglied seit: 15.04.2023
Beiträge: 7
Mitglied seit: 15.04.2023
Beiträge: 7
How do I write a program on a 3-axis vertical machine, milling the arc according to XZ, and using the Y axis as the plunging depth?
1.PNG ( 13.38KB )
Anzahl der Downloads: 34
In the user's manual, this program is written strangely and too sophisticated, I don't understand anything in it, what I'm writing about. I would like it to be in a simple way, for example;
1 L X-20 Z +0
2 CC X+0 Z+0
3 C X+20 Z+0 DR+
1.PNG ( 13.38KB )
Anzahl der Downloads: 34In the user's manual, this program is written strangely and too sophisticated, I don't understand anything in it, what I'm writing about. I would like it to be in a simple way, for example;
1 L X-20 Z +0
2 CC X+0 Z+0
3 C X+20 Z+0 DR+
06.01.2024, 19:27 Uhr
Julian99
Level 1 = Community-Lehrling
Gruppe: Mitglied
Mitglied seit: 12.12.2019
Beiträge: 38
Mitglied seit: 12.12.2019
Beiträge: 38
ZITAT(MontanaT @ 22.12.2023, 14:19 Uhr) 
How do I write a program on a 3-axis vertical machine, milling the arc according to XZ, and using the Y axis as the plunging depth?
1.PNG ( 13.38KB )
Anzahl der Downloads: 34
In the user's manual, this program is written strangely and too sophisticated, I don't understand anything in it, what I'm writing about. I would like it to be in a simple way, for example;
1 L X-20 Z +0
2 CC X+0 Z+0
3 C X+20 Z+0 DR+
1.PNG ( 13.38KB )
Anzahl der Downloads: 34In the user's manual, this program is written strangely and too sophisticated, I don't understand anything in it, what I'm writing about. I would like it to be in a simple way, for example;
1 L X-20 Z +0
2 CC X+0 Z+0
3 C X+20 Z+0 DR+
Hey MontanaT,
Here are two examples. The first one is milling in XZ with infeed in Y and the second one YZ with infeed in X. The Stock is configured like your Picture. Q108 is the Tool Radius of the active Tool from the Tool Table. So that the Tool Point is in the Center of the Tool. Here on Page 104 you can take a look for the different cc settings: https://content.heidenhain.de/doku/tnc_guid...b/737759-R4.pdf
If you have questions, tell me.
Kind Regards
Julian
Angehängte Datei(en)
CC_C_YZ.H ( 553Byte )
Anzahl der Downloads: 9
CC_C_XZ.H ( 553Byte )
Anzahl der Downloads: 4
CC_C_YZ.H ( 553Byte )
Anzahl der Downloads: 9
CC_C_XZ.H ( 553Byte )
Anzahl der Downloads: 4
1 Besucher lesen dieses Thema (Gäste: 1) 0 Mitglieder: |
